Raised Deck Hatches

• Coaming Height: Generally between 100-600mm.
• Width & Depth: Generally between 600-1200mm Square OR 600-800 x 900-1600 Rectangular – IDEALLY: Hinging via the long edge where possible.

• Coaming – 4mm Plate with internal bracing from 5mm thickness box section as suitable.
• Hatch – 5mm Plate with extruded hatch box/bracing.
• Internal Skin – 2mm Skin.

Steel [HA250 STD] or 316 SS:

• Outer Frame – 4mm Plate radiused, with internal bracing from 4mm strip.
• Hatch – Steel 4mm Plate / SS: 3 or 4mm Plate dependant on size/application, with 3mm hatch box/bracing in all cases.
• Internal Skin – 0.9mm Skin, Steel Zinc Primed, SS 316.

• Construction method as standard is generally suitable for Pressure testing for up to 3 metres or 0.3 bar.
• For greater pressure heads or “over-size” items, options are available: please make specific enquiry.

• Central locking via polished T-Bar Stainless Steel handle standard inside & outside, operating multiple closing pins – generally Min 4 to Max 10, as required by sizing/pressure: All pins and components inside the door are Stainless Steel construction.
• Raised Deck Hatches are supplied with 1 x SS Gas stay to hold open, to generally apprx 95deg opening angle.
• Weld-In or Bolt-In fitment formats available.
• Various finishes available: Raw / Passivated / Primed / Powder Coated / Wet Sprayed.

*Materials can be mixed/matched, ie: Aluminium coaming with SS Hatch / Steel Frame with Aluminium Hatch.

• Aluminium or Zinc steel Internal skins can be switched for SS Skins in all cases.
• Aluminium Hatches: Extruded EPDM Seal.
• Steel & SS Hatches: Extruded Silicone Seal.

• Additional SS gas strut [2 total].
• Safety kit to [1 only] gas strut: has to be manually operated to allow strut to compress/hatch to close.
• Deadlock utilising Internal Locking Snib ONLY.
• External Padlock Hasp.
• Mounting point for [client supplied] proximity switch for monitoring open/closed status.

*Drawings available on request.